Skip to main content
Advertisement
Live broadcast

Oil for salvation: why the Russian auto chemicals market needs urgent localization of components

The Russian fleet is at risk of facing a sharp increase in demand for engine oils amid the transition to low-grade fuels.
0
Photo: IZVESTIA/Dmitry Korotaev
Озвучить текст
Select important
On
Off

The Russian lubricants market has reached a critical juncture. Despite the apparent abundance of products on the shelves of car shops and gas stations, the industry remains vulnerable to external factors: in fact, half of the packages of functional additives, without which it is impossible to produce a single liter of modern engine oil, are still imported from abroad. Industry experts and market participants warn that only the deployment of large-scale production of high-grade petrochemical components in the country will avoid a structural crisis with supply disruptions, a sharp rise in the cost of fuels and lubricants and a threat to the resource of the country's fleet engines. As Izvestia found out, the state is already trying to turn the situation around — starting in 2028, the rules of the game will change, and the localization of production will gradually deepen.

Balancing on half

After the departure of the so-called "big four" global additive manufacturers (Lubrizol, Infineum, Afton and Oronite) in 2022, domestic oil blenders quickly refocused on supplies from friendly countries, products from the Union state and local production, which received an additional incentive. According to the B2X industry agency, if in 2021-2022 the share of imports from non-CIS countries was 69%, then by 2025 it has decreased to 50%.

Despite the fact that part of the demand is covered by the capacities of Russia and Belarus (including the EddiTek plant in Novopolotsk), half of the import market is an alarming signal in the face of increasing sanctions pressure, increasing complexity of cross—border payments and currency exchange rate volatility, analysts say.

"The finished engine oil is a base oil plus a high—tech additive package: detergent, dispersant, anti-wear, anti-oxidant. And while base mineral oils of the first and second groups are in abundance in Russia due to oil refining, premium synthetics (bases of groups IV and V) and the synthesis of chemical compounds for additives themselves are still dependent on external supplies," Olga Orlova, head of Industry, explained to Izvestia Institute of Oil and Gas Technologies. "Any failure in logistics from Asia or secondary sanctions can paralyze the oil mixing plants."

Fuel Multiplier

The risk of component shortages is compounded by the growing demand for lubricants themselves. The load on engines in the commercial and private segments is increasing, and the operation of machinery is becoming more intensive.

An additional factor is the quality of the motor fuel. Since September 1, 2026, the Russian government has allowed the sale of gasoline of reduced environmental class K2, K3, K4 and K5 at gas stations (the emission requirements of which comply with Euro-2, Euro-3, Euro-4 and Euro-5 standards). The main difference between the modern K5 standard and its technological predecessors is the concentration of sulfur, resins, and aromatic hydrocarbons. If the sulfur content in gasoline and diesel of class K5 is strictly limited to 10 mg/kg (10 ppm), then for K3 this level is already 150-350 ppm, and for K2 it can reach an impressive 500 ppm — that is, ten times higher.

During the combustion of such fuel, sulfur oxides are formed in the cylinders, which, upon contact with condensate and steam, are transformed into sulfuric and sulfuric acids. Acidic compounds formed during the combustion of sulfur are neutralized by the alkaline components of the lubricant, which requires car owners and carriers to replace engine oil more frequently.

"The return to gas stations of fuels whose emission requirements comply with Euro-2, Euro-3 and Euro-4 standards is a forced measure aimed at saturating the market, but for car owners it means one thing: the usual car maintenance regulations will have to be reviewed. Owners of most modern cars with high-tech modern engines, which are much more sensitive to sulfur combustion products, will have to forget about the standard dealer intervals of "one replacement every 15,000 km" (or even once every 10,000 km). With regular refueling of environmental fuel grades K3 or K4, the oil change interval should be reduced by at least 30-50%," says Igor Morzharetto, auto expert, partner at the Autostat analytical agency. — For gasoline engines, the safe threshold will be 7 — 7.5 thousand km, and for high—load modern turbo engines and diesel engines with direct injection — no more than 5-6 thousand km."

According to him, in such conditions, the quality of the functional additive package is of critical importance. A modern engine needs oils with a high supply of antioxidant, anticorrosive and dispersing components. A high-quality additive must not only neutralize the surge in acidity, but also keep soot and sulfur particles in suspension, preventing them from settling in a dense abrasive layer on the parts of the cylinder piston group. Low-quality or counterfeit oils on "empty" packages degrade in such conditions literally in 3-4 thousand kilometers.

"Any attempt to save on the frequency of maintenance or filling lubricants with a questionable additive package when using low—grade fuel will inevitably result in an oil burn, clogged catalysts or particulate filters and the risk of expensive engine overhaul," the expert warns.

Petrochemical basis: from monomers to molecules

The solution to the problem lies in the transition from a simple mixing of foreign components to the creation of a complete domestic chain of redistribution. The raw material base for this in Russia is already being formed by large-scale petrochemistry.

For example, SIBUR is developing the production of basic petrochemical products necessary for the synthesis of domestic additives. We are talking about the production of linear alpha-olefins (LAO), maleic anhydride, benzene, phenol, butyl alcohol, 2-ethylhexanol and propylene oligomers, ethylene and propylene oxides, glycols, amines. These components allow us to produce a wide range of functional additives within the Russian Federation.

In addition, they solve the problem of synthetic base oils. Linear alpha-olefins act as raw materials for polyalphaolefins (PAO — base oils of group IV, providing easy start-up in frost and stability under high loads). Polyalkylene glycols (base oils of group V) are created on the basis of ethylene and propylene oxides. The conversion of 2-ethylhexanol allows the synthesis of esters — thermostable dioctyl sebacinate (DOST), dioctyladipinate (DOA) and dioctyl terephthalate (DOTF) and specialized synthetic oils.

"Localization of petrochemical processing is the only insurance against the crisis," emphasizes Olga Orlova. — When the raw materials and synthesis are located inside the country, the blender plant does not depend on sea freight, container delays and refusals from foreign contractors. It becomes possible to flexibly refine formulations to meet the requirements of automakers and plan production costs without sudden exchange rate changes, although it is impossible to completely untie market prices from world quotations as long as some of the components remain imported."

The state includes points

To stimulate domestic synthesis, the government is moving from soft recommendations to stricter regulation. In September 2026, the Government of the Russian Federation approved Resolution No. 1154, which introduces large-scale changes to the regulations for confirming the Russian origin of industrial products (Resolution No. 719).

The new rules will come into force on January 1, 2028. For the first time, additive packages were allocated to an independent category, and a progressive point scale was introduced to recognize "Russian" products.:

  • 2028-2030: for individual additives, the threshold will be 45 points, for packages — 20 points.;
  • 2031-2032: requirements will increase to 55 and 30 points, respectively;
  • Starting in 2033: the bar will rise to 65 points for additives and 40 points for packages.

Points will be awarded not for formal "repackaging", but for real petrochemicals. Thus, the use of Russian raw materials at a level of 70% guarantees the manufacturer 30 points, and the fact that chemical synthesis of the additive molecule is carried out on the territory of the Russian Federation adds another 25 points. In the localization scoring system of the Ministry of Industry and Trade (regulated by Decree of the Government of the Russian Federation No. 719 and new PP No. 1154), the number of points scored directly affects obtaining the legal status of a "Russian product", access to public procurement (for example, against the background of a "Russian product" suppliers with foreign products are automatically rejected from procurement), material preferences — access to preferential lending or subsidizing.

At the same time, the new regulations do not prohibit the commercial turnover of foreign products, but gently cut off non-localized oils from government and corporate purchases, supplies for strategic enterprises and assembly lines.

If refining capacities and investments in specialized low- and medium-tonnage petrochemicals do not keep pace with regulatory deadlines by 2028, the market risks facing a shortage of certified domestic oils. However, if the production is successfully launched, for the first time in modern history, Russia will receive a fully enclosed and sovereign automotive industry, from an oil well to a canister of products on a shelf.

Переведено сервисом «Яндекс Переводчик»

Live broadcast