Skip to main content
Advertisement
Live broadcast
Main slide
Beginning of the article
Озвучить текст
Select important
On
Off

In Russia, an experimental complex has been created based on the NICA accelerator to test new type of nuclear power plant technologies. In such systems, the nuclear reaction is triggered using accelerated particle beams. In the world, such processes are still at the stage of development. They will help make nuclear energy safer, enable the use of new types of nuclear fuels, and recycle long-lived radioactive waste. However, the technology will be effective only if the energy generated by the reaction exceeds the cost of creating an accelerated beam, experts noted. A new experimental complex is likely to solve this problem.

How to turn on and off a nuclear reactor

The experimental facility was named SIAET — "station for research of nuclear energy technologies". This is a joint project of specialists from the Institute of Physical and Technical Problems (part of Rosatom) and the Joint Institute for Nuclear Research, as well as a number of other Russian scientific centers.

инженер Сергей Четвериков

Engineer Sergey Chetverikov

Photo: JINR Press Service

"The main idea of the complex is to study the electro—nuclear method of energy production," Ildar Gazizov, head of the IFTI uncooled detector laboratory, told Izvestia. — The essence of the method is that a beam of accelerated particles — protons or light ions, formed on a NICA nuclotron, is directed at a target. This is an array of heavy metal, such as lead, weighing up to 25 tons and with a diameter of up to one and a half meters. When particles enter the mass, a powerful stream of neutrons is generated.

As the scientist explained, in the future, as part of an electro—nuclear installation, the resulting neutrons will trigger the nuclear fission reaction of heavy elements, which will give energy. In the meantime, the experimenters' task is to study and select the optimal beam parameters, compare protons and light ions, and based on this, choose which type is best suited for future industrial installations.

The advantage of the new technology lies in the very principle of operation. If a self—sustaining chain reaction occurs in traditional reactors, then in electric nuclear installations, nuclear fission is triggered by an external source - a beam of particles obtained from an accelerator. This allows the reactor to be switched on and off as needed, which makes the process more economical and safer than in modern nuclear power plants.

— Another important factor is the involvement of natural isotopes of uranium-238 and thorium in the cycle. The first of these elements on Earth is a hundred times more abundant than uranium-235, which is traditionally used in reactors, and thorium reserves are 3-4 times higher than the reserves of all uranium isotopes combined. This stretches the nuclear energy fuel base for thousands of years," Ildar Gazizov noted.

наука
Photo: JINR Press Service

There is another significant effect, he added. The neutrons that are generated when the beam collides with the target have energies unattainable by traditional reactors. Such particles can "burn out" radioactive waste — neptunium, americium, curium, and others — that remain during the nuclear reaction.

How to burn radioactive waste

— Russia is focused on the implementation of a closed fuel cycle. His logic is to use spent nuclear fuel from some reactors as "fuel" for others. However, the necessary complete purification of the fuel is accompanied by the formation of a large number of minor actinides, elements heavier than uranium. They are radiotoxic and have a long half-life. In a controlled chain reaction, the neutron energy averages about 2 MeV (megaelectronvolts). It is not enough to destroy these elements," explained Anton Baldin, Doctor of Physico—Mathematical Sciences, Head of the JINR High Energy Laboratory Department.

At the same time, even in the most advanced closed cycle, fuel processing will annually produce up to 25 cubic meters of high—level waste per gigawatt, 50-100 cubic meters of medium—level waste and up to 700 cubic meters of low-level waste. The electro—nuclear method will make it possible to obtain high-energy neutron fluxes from 2 to 50 MeV, which divide any minor actinides, the expert said.

наука
Photo: JINR Press Service

According to him, at this stage, the disposal of radioactive waste is a key issue when discussing the future of energy. The researchers also consider the "illumination" of spent nuclear reactors as a promising way to extend the life of existing reactors. However, in order for electric nuclear installations to justify themselves, it is necessary to generate enough electricity to maintain the accelerator beam and provide external consumers. This task will be solved at SIYET.

— Previous long-term studies have allowed us to determine the parameters of the optimal proton accelerator. However, recent calculations have shown that a light core accelerator, which uses significantly less energy, may be preferable. At the station, scientists will be able to compare the parameters of these beams in field experiments when interacting with the same targets. As a result, experts will receive an unambiguous answer as to what type of accelerators are suitable for electric nuclear installations," Anton Baldin explained.

In addition to the main tasks, SIAET will be useful for testing technologies for promising small nuclear power plants, engines with a nuclear power source and other promising technologies. Scientists at the station will also be able to simulate the effects of cosmic radiation on equipment and satellites, the specialist added.

How to make small-sized nuclear reactors

— Interest in electro-nuclear research appeared in the early 1990s after the work of Nobel Prize winner Carlo Rubbia. An analysis of the concept showed that, most likely, the niche of such installations is not energy, but the combustion or transmutation of minor actinides and, possibly, the promotion of thorium involvement in nuclear power by producing fissile uranium isotopes in it. At the same time, there is a risk that the technology will remain at the research level," commented Georgy Tikhomirov, Deputy Director of the Institute of Nuclear Physics and Technology at the National Research Nuclear University MEPhI.

наука
Photo: TASS/Alena Bzhakhova

He clarified that the main components of the electro-nuclear technology need to be worked out. In particular, it is necessary to create an accelerator that operates continuously and with specified parameters, and a target that should produce a stream of neutrons with the desired characteristics. In addition, the reactor itself needs to adjust the processes of converting some isotopes into others. However, the answers to these questions can be found at the current level of technology development. The main thing is that the products obtained — energy and waste recycling — should be competitive.

— When the project reaches the zone of practical implementation, installations can become one of the main ways of nuclear energy development. They will solve many problems while simultaneously addressing energy supply issues. It is especially attractive that the reactor can be "turned off" with a single button, which is important from a safety point of view. But so far, such projects are only in the form of experiments. They have not been worked out in terms of economic implementation," said Evgeny Shirokov, Deputy Head of the Department of Nuclear Physics at the Moscow State University Faculty of Physics.

However, nuclear technologies have a limitation: a certain volume of reactor and active substance is always required for the reaction to take place. In the long term, systems with external "ignition" can help create more compact installations, the expert noted.

Переведено сервисом «Яндекс Переводчик»

Live broadcast