Skip to main content
Advertisement
Live broadcast
Main slide
Beginning of the article
Озвучить текст
Select important
On
Off

In Russia, they may introduce a point assessment of the localization level of electronic components that are required for the production of cars. This should stimulate the development of the domestic automotive electronics industry, experts say, but it may lead to an increase in the cost of cars. Details can be found in the Izvestia article.

Sensors are invited to score

The Ministry of Industry and Trade proposes to introduce a point system for assessing the localization level of electronic components used in the manufacture of cars. The relevant draft government decree is posted on the portal of draft regulatory legal acts.

Починка двигателя авто
Photo: IZVESTIA/Dmitry Korotaev

As follows from the document, we are talking about electronic control units for vehicle components (engine, transmission, ABS, ESP and driver assistance systems, instruments, multimedia, climate control, etc.), various sensors, GLONASS/GPS modules, as well as alcohol pumps. It is assumed that in order for an electronic automotive component to receive the "Russian" status, it will have to score at least 140 points. The mandatory conditions for this will be the availability of rights to design documentation and software, confirmation of design localization, as well as surface mounting of chip components. This is the so-called basic level: in the future, manufacturers who perform only these operations will receive a reduced number of points.

For example, in 2028, only half of the established limit of 140 points, until 2030 — a quarter of this value, and in 2030-2032 — only 15%. After 2033, according to the idea of the Ministry of Industry and Trade, points for the basic level of localization of automotive electronics will not be awarded at all. At the same time, it is planned to gradually increase the localization threshold for some types of electronic components: to 205 points in 2027 and to 245-265 by 2028.

At the same time, it is planned to introduce some kind of bonus points for performing additional technological operations such as software installation, packaging, functional testing, use in the manufacture of sensors or modules of domestic microcircuits, printed circuit boards, chips, connectors and other components. Depending on the level of complexity of an additional operation, you can count on 5-150 localization points.

Разработка чипа
Photo: IZVESTIA/Sergey Lantyukhov

"Increased points for the introduction of Russian electronic components will stimulate an accelerated increase in the localization of automotive equipment," the explanatory note to the document says.

If car electronics is now considered as "automotive products", then the proposed changes provide for its transition to the category of "radio electronics products". This measure, as follows from the accompanying documents to the draft resolution, will allow manufacturers to rely on government support measures for the electronic industry.

"In the period 2021-2023, there was a sharp and abrupt increase in the exchange rate, as well as unprecedented problems with delivery times and a shortage of electronic components for automotive electronics. As a result, the share of foreign components in the price of final products has increased to more than 50%, and this value has ceased to be predictable," the explanatory note to the document emphasizes.

Производство проводки
Photo: TASS/Xie Wanbai

The amendments provide for mandatory registration of embedded software of electronic components in the unified register of Russian programs or in the register of programs of the EAEU countries. This requirement is expected to enter into force on July 1, 2027.

Expansion and deepening

The proposed changes to the electronic component evaluation system are designed to deepen the localization of these automotive components, according to Maxim Kadakov, editor-in-chief of Za Rulem magazine. At the moment, it is rather superficial, he notes.

— With rare exceptions, the production of automotive electronics in our country is now reduced to the simplest operations: casting housings, final assembly of blocks and modules, stamping of metal and plastic parts for them. The so—called second— and third—level components - chips, microchips, chemicals, etc. - are usually made in foreign countries," Maxim Kadakov told Izvestia.

The new rules will primarily be an incentive for the production of such components and components for the manufacture of automotive electronics in our country, he believes.

Производство комплектующих деталей для авто
Photo: TASS/Xie Wanbai

Anton Shaparin, Vice President of the National Automobile Union, notes that the proposed changes significantly tighten the requirements for Russian automotive electronics.

— The first, simplest stage of localization of these components in our country has been more or less mastered. It is necessary to move to the next level, which requires more complex operations and processes. It is impossible to achieve this without introducing stricter requirements for the localization level of electronic components," said NAS Vice President.

Incentive to produce

The proposals developed by the Ministry of Industry and Trade of Russia allow for a more flexible approach to localization issues, which, of course, will positively affect the increase in automotive electronics components produced in Russia, said Alexey Vorobyov, CEO of NPP Itelma LLC. These amendments will help to increase the depth of localization of automotive components, he is confident.

— When an enterprise has a long-term perspective in local projects, it becomes economically feasible to invest in developers, designers, technologists, electronics, metrology, calibration and testing specialists. This is especially important for sensors, where value is created not only by assembly, but also by the development of circuitry, software, signal processing algorithms, monitoring techniques, and a test base. The changes also stimulate the development of internal projects and our own production infrastructure," Alexey Vorobyov told Izvestia.

Вывеска Минпромторга России
Photo: IZVESTIA/Pavel Volkov

He considers the requirements for including software in the registry to be an important change. Software is a key component of any electronic car unit, he explained.

"The requirements for inclusion in the registry are an excellent tool for eliminating pseudo—localization, when a Russian manufacturer is provided with software in a closed form by its foreign technology partner," said Alexey Vorobyov.

He noted that the growing localization requirements take into account the phased development of operations and allow us to confirm the Russian origin. This creates an incentive to invest in engineering competencies, Vorobyov emphasized.

Price risks

Recognizing the need for further localization of the automotive component industry, experts warn of the risks that could lead to higher car prices. First of all, this is due to the potentially higher cost of deeply localized automotive components compared to their foreign counterparts, explains Igor Morzharetto, an auto expert and partner at the Autostat analytical agency.

Менеджер отдела продаж идет вдоль машин в автосалоне
Photo: IZVESTIA/Sergey Lantyukhov

As an example, he cited microchips that are used in electronic components of machines: only a few companies produce them in the world. At the same time, absolutely all automakers buy these chips — both European, American, and Chinese, the expert emphasized.

— It is due to the multi-million copies that it is possible to ensure the low price of such a chip. Even if all domestic car factories switch to maximum capacity utilization, the volume of consumption, and therefore the production of such chips in our country, will be dozens, if not hundreds of times lower. As a result, the cost of such a chip produced in Russia will be an order of magnitude higher than that of its imported counterpart," explained Igor Morzharetto.

Localization and the achievement of technological sovereignty are certainly important and necessary processes, he notes. However, they must also rely on economic expediency, Igor Morzharetto emphasized.

Купюры номиналом 5 тыс.
Photo: IZVESTIA/Yulia Mayorova

The transition to domestic automotive components with an increase in their cost will inevitably affect the final price of cars, Anton Shaparin is sure.

— Obviously, these potential costs will be included in the cost of the car itself, — he noted.

In addition, deeper localization of electronic automotive components will require significant investments in the modernization of existing and the creation of new enterprises. In conditions of limited financial resources, not all manufacturers will be able to afford additional serious investments, the NAS Vice president believes. As a result, some players may leave this market, he believes.

Переведено сервисом «Яндекс Переводчик»

Live broadcast